Priya Vibrating Screens

The screen body of 'Priya Vibrating Screen' is made with sides ends of steel plate and braces of steel pipes and profiles. It is reinforced where necessary and point specially subject to wear are protected by replaceable wearing parts. At the feed end the screen is usually filled an unperforated section which serve to receive and distribute the feed in. This way the screen elements are protected against damage and unnecessary wear.

'Priya Vibrating Screens' mechanism consists of a shaft journal led in the screen sides in two spherical roller bearings and fitted at both ends with off centre weights. The shaft is enclosed by protective steed tube connecting the bearing housings & branching the screen body. The off-center weights consist of a number of plate segments. The throw is easily adjusted by adding or removing segments. Revolution of vibrating screen varies between 950 RPM to 1100 RPM.

'Priya Vibrating Screens' body is carried by compressed coil springs placed at the end of the screen sides. The springs are dimensioned so that only a very small proportion of the vibrations of the screen are transmitted to the base.

'Priya Vibrating Screens' are manufactured in plenty of sizes like 600 x 1500, 900 x 1800, 1200 x 2400, 1200 x 3600, 1500 x 4600, 1500 x 4900, 1800 x 5500, 1800 x 6000, etc. Custom size screen as per your design and requirements can also be made for special purposes.